Flex-a-lite 56400 Camaro Radiator Fits 1982-1992 Manuel d'utilisateur télécharger pdf

Camaro Radiator #56400

Fits 1982-1992

INSTALLATION INSTRUCTIONS

REMOVAL OF EXISTING FAN AND SHROUD ASSEMBLY:

1. Make sure the engine is cool!

2. Disconnect negative (-) battery cable from battery.

3. Remove “Z” shaped air ducting between air filter canister and flexible air duct.

Note:

If your vehicle

comes equipped with a strait forward or other air ducting configuration, remove it.

(see detail 1)

4. Remove remaining flexible air duct attached to intake manifold. Remove intergraded tube as well

leading to passenger side valve cover.

(see detail 1)

5. Remove air ducting support bracket from top radiator bracket, and remove or detach Air Conditioning

(A/C) lines (if equipped) from shroud.

6. Pull A/C lines away from top of radiator and hold in place over motor; this gets the hoses out of the way

for better access.

Tip:

Try using long zip ties to secure loose objects in place as needed.

7. Remove electrical or clutch fan at this time

8. Release wire loom from mounts on lower metal support bracket (supporting bottom radiator hose). Pull

bottom radiator hose out of bracket.

(see detail 3 on page 2)

9. Remove the bolts holding together the following items:

a. Power steering cooling lines.

b. Lower frame cross member.

c. Plastic bottom fan bracket.

Note:

You will be reusing the metal support bracket, plastic bottom

fan bracket and bolts during new radiator installation.

(see detail 8 on page 3)

10. Remove radiator cap and drain radiator; drain valve is on passenger side at bottom.

11. Disconnect the following:

a. Overflow hose leading to coolant reservoir.

b. Bottom radiator hose from radiator and let remaining coolant drain.

c. Top radiator hose from radiator.

12. Remove the bolts (4) securing top radiator bracket to top cross member and top of radiator.

Note:

Save

the bolts to be reused later.

(see detail 2)

13. Pull the original radiator up & out from the engine compartment then set it aside.

(see detail 4 page 2)

14. Clean out any debris (leafs, bugs, dirt, coolant) from bottom cross member where original radiator

previously rested.

Flexible air duct

(Detail 1)

Top radiator bracket

(Detail 2)

07-01-08 #99400 Page 1 of 3

1 2 3

Résumé du contenu

Page 1 - Camaro Radiator #56400

Camaro Radiator #56400Fits 1982-1992INSTALLATION INSTRUCTIONSREMOVAL OF EXISTING FAN AND SHROUD ASSEMBLY:1. Make sure the engine is cool!2. Disconnec

Page 2 - (Detail 4)

INSTALLATION OF NEW RADIATOR:1. Start by removing the bottom rubber radiator mounts. Trim the rubber mounts flat across the top toallow for the flat b

Page 3 - (Detail 9)

12. Attach bracket #56405 on top of bracket #56403 and into upper cross frame on passenger’s side. Youwill need to remove, and then reinstall a bolt p

Commentaires sur ces manuels

Pas de commentaire

Flex-a-lite 56400 Camaro Radiator Fits 1982-1992 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Flex-a-lite 56400 Camaro Radiator Fits 1982-1992. Flex-a-Lite 56400 Camaro Radiator Fits 1982-1992 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Flex-a-lite 56400 Camaro Radiator Fits 1982-1992